Tile & Flooring in Kings Point, FL.
Tile & Flooring for Kings Point homes, matched to vetted, insured local remodelers. Tile is the most visible surface in the bath, and the most likely to fail when it is installed over the wrong substrate. We connect you with insured local crews that handle substrate prep, Schluter Kerdi or RedGard waterproofing, tile layout, and grout selection for shower walls, bathroom floors, and heated floor systems.
Why is tile & flooring different in South Shore Tampa Bay?
Apollo Beach and Sun City Center tile projects usually pair with a curbless shower conversion for the area's heavy 55+ demand, and bay-adjacent homes in flood zones need moisture-resistant backer board as a baseline, not an upgrade. We check subfloor flatness before setting large-format tile.
What's included in tile & flooring in Kings Point?
- Substrate inspection and replacement of rotten or soft backer board, subfloor, or mud bed
- Schluter Kerdi, RedGard, or PVC liner waterproofing in the shower pan and on wet walls
- Shower wall and curb tile with proper slope to drain, plus preformed niche or bench tile
- Bathroom floor tile in porcelain, ceramic, marble, or natural stone with crack-isolation membrane
- Heated floor mat install (Nuheat, Schluter DITRA-HEAT, or SunTouch) with a dedicated GFCI wall control
- Grout, color-matched silicone at changes of plane, and a final seal on natural stone
When does a Kings Point home need tile & flooring?
- Existing grout is crumbling, tile is loose, or you see water stains on the ceiling below the bath
- You are switching from a fiberglass tub surround to a real tile surround
- You want a heated floor to take the chill off tile in winter
- The current 1-inch mosaic floor is dated and you want a 12x24 or 24x24 large-format porcelain
- You are refreshing the floor without a full remodel and want new tile laid over a sound substrate
What do Kings Point homeowners ask about tile & flooring?
How fast can you get to Kings Point for tile & flooring?
Same-day service in Kings Point on most weekdays. Call early for best same-day availability. After-hours emergency calls are answered by an on-call remodeler, not a dispatcher.
What does tile & flooring cost in Kings Point?
$2,500-$18,000. Pricing is the same across Tampa Bay, with no mileage upcharge for Kings Point. We confirm a flat-rate quote before any work starts.
How does Kings Point's climate affect this service?
Gated 55-and-over community within Sun City Center, humid year-round, aging population drives the heaviest accessibility demand in the metro.. Apollo Beach and Sun City Center tile projects usually pair with a curbless shower conversion for the area's heavy 55+ demand, and bay-adjacent homes in flood zones need moisture-resistant backer board as a baseline, not an upgrade.
How much does bathroom tile cost in Tampa Bay?
A bathroom floor retile in the Tampa Bay area runs $1,800-$4,500 for a typical 5x8 bath with porcelain. A full shower wall retile with new waterproofing lands at $3,500-$9,000. Heated floor systems add $1,200-$2,500 depending on square footage. Material is the biggest cost driver: porcelain starts around $4/sq ft, marble and handmade zellige can run $20+/sq ft.
How long does bathroom tile installation take?
A floor-only retile with proper substrate prep finishes in 2-4 days. A full shower wall and floor with waterproofing runs 5-10 days on site. Heated floors add a day for mat install and a separate wall-control rough-in. Tile needs 24-48 hours to set before grout, and grout needs 24-72 hours to cure before shower use.
Need tile & flooring in Kings Point?
Call for a free quote. Flat-rate pricing, same-day service on most jobs.