Shower remodels and walk-in shower installs across Tampa Bay
A tired fiberglass surround, a leaking pan, or a curb you trip over is enough reason to redo a shower. We connect you with insured local crews that demo the old unit, install a new pan or curbless waterproofing, retile the walls, set a new pressure-balancing valve, and finish with frameless glass and new hardware. Tampa Bay hard water leaves mineral spotting on glass fast, so we talk through coatings and cleaning at the consult before you pick a finish.
What's included in this service?
- Demo of the existing tub or shower pan, walls, valve, and drain
- Shower pan install (PVC liner or Schluter Kerdi) with proper slope to drain and curb or curbless transition
- Pressure-balancing or thermostatic valve replacement and trim install
- Wall tile with waterproofing behind the tile (Schluter Kerdi board or RedGard on cement board)
- Frameless glass enclosure measure and install with new hardware and sweep
- Bench, niche, grab-bar blocking, and accessories added during the rough-in
When do you need this service?
- Fiberglass surround is cracked, yellowed, or pulling away from the wall
- Grout is failing and water is getting behind the tile (look for soft drywall outside the shower)
- You want a low-curb or curbless entry instead of a 4-inch step-over
- The valve sticks, runs hot-cold swings, or has not been updated since the 1990s
- You want a frameless glass enclosure but the existing wall is not plumb enough for it
What do homeowners ask about Shower Remodel?
How much does a shower remodel cost in Tampa Bay?
A standard alcove shower replacement in the Tampa Bay area runs $9,000-$16,000. A custom walk-in with frameless glass, a niche, and a curbless entry lands at $16,000-$28,000. The biggest cost drivers are the size of the tile, glass thickness, and whether the drain is being moved.
How long does a shower remodel take?
Most Tampa Bay shower remodels finish in 2-4 weeks of on-site work: 2-3 days demo, 2-3 days rough-in and waterproofing, then tile and grout, then a final cure day before glass measure and install. Custom glass adds 1-2 weeks for fabrication after the final measure.
What is the difference between a shower remodel and a tub-to-shower conversion?
A shower remodel replaces an existing shower in place. A tub-to-shower conversion removes a bathtub and replaces it with a low-threshold shower, which usually means moving the drain and reworking the wet wall. Conversions cost more because of the plumbing and the larger tile area.
Do I need a permit to remodel a shower in Tampa Bay?
Yes, when you are moving plumbing, replacing the shower pan, or doing any electrical work like adding a light or a fan. Hillsborough, Pinellas, and Pasco counties each handle this through their own online permit portal. Verify any contractor you hire pulls the permit before work begins.
What tile is best for a shower in Tampa Bay?
Porcelain tile is the most common pick for a Tampa Bay shower: it is dense, low-porosity, and rated for wet areas. Large-format porcelain (12x24, 24x24) reads modern and cuts down on grout lines. Natural stone like marble or travertine looks great but needs sealing and more careful cleaning, especially with the hard water common across the region.
Where do we offer Shower Remodel in Tampa Bay?
We provide shower remodel in every city and community across Tampa Bay. Pick your city for local climate notes and service specifics.
See shower remodel in all 72 cities
Need shower remodel in Tampa Bay?
Call for a free quote. Most work scheduled within the week.